Anaesthesia Systems

Specification

• Structure        :         Square tubular Electrostatically powder coated steel sections.
• Top Tray : Steel top tray at eye level to keep monitoring equipments etc. (595 mm  330 mm).
• Table Top :   Stainless Steel (595 mm  330 mm).
• Drawer    :    Extra large one storage drawer.
• Cylinder Yokes  :   Pin-indexed gas specific dual oxygen & nitrous oxide.
• Regulators   :     Nitrolock system is provided which activates only when oxygen flowmeter control valve opens to prevent the risk of administering 100% nitrous oxide.
• Nitro Lock Unit   :   Nitro lock system is provided which activates only when Oxygen Flowmeter control valve opens to prevent the risk of administering 100% Nitrous Oxide.
• Oxygen failure warning Device   :   Pneumatic device which activates audible alarm when oxygen supply pressure falls 215 kpa.
• Rotameters   :      Long (230 mm) rotating bobbin flowmeters accurately calibrated.
• Oxygen - 100 ml/min to 8 Litres/min.
• Nitrous Oxide - 200 ml/min to 12 Litres/min
• Oxygen flow control is on left side of flowmeter bank as it is preferred Gas.
• Vaporisers     :   Two plenum type vaporiser for Ether and Trilene supplied & one Halothane vaporiser as standard.
• "Non-return cum pressure
• relief valve    :   Minimises risk of backflow of gases, blows off when pressure exceeds 200 cm water coloumn.
• Emergency Oxygen    :   Guarded flush button out-let at table level.
• Accessories    :    One Schrader type self sealing oxygen out-lets (4.22 kg/cm2) for ventilators etc. Extended rear platform for two 10 litre water capacity cylinders. Circle absorber can be securedly mounted on the left side of the main frame.
• Breathing Attachment   :    Standard magills circuit